China claw foot bathtubs wholesaler factory manufacturer supplier

Ciler was founded in 2018 and has 4+ years of expertise specialized in the production of Acrylic Bathtub. Ciler is a China-based manufacturer and supplier of Acrylic Bathtub in the production of BATHTUB FITTINGS, APRON BATHTUBS, PLINTH BATHTUBS and CLASSCIAL BATHTUBS. Our products are sold well in every province and city of the whole country and also exported to about 27 countries and regions with professional technical force, advanced equipments, scientific management system and perfect after-sales services. We continue to produce goods using superior raw materials, superior manufacturing techniques, innovative technology, and superior quality. In any case, if you have any new product ideas or concepts, please contact us. We are excited to collaborate with you and finally provide you with satisfied products.

People May Ask

Can a cast iron tub be refinished more than once?

Yes, it is possible to re-urface or refinish a bathtub that has already been reglazed. If the bathtub hasn't been used regularly but the surface shows signs of wear, the initial repair procedure may not have been completed or it may not have dried entirely after the service.

How much does the removal of a cast iron tub cost?

Iron tub removal company Ca t. The cost to remove a standard cast iron tub ranges from $255 to $395. Your cost could be higher depending on where the tub is located in the house or on the land.

What do Japane e oaking tubs consist of?

Japanese oaking tubs have a drain and are constructed into a pace that resembles a hower. The location enables you to wash, rinse, and dry all at once without having to use water elsewhere. They can, however, also be used as a standalone unit, much like an American-style bathtub.

A cast iron clawfoot tub weighs how much?

The typical cast iron tub weighs 250 to 500 pounds and has a capacity of 82 gallons. A full acrylic bathtub, on the other hand, can weigh up to 120 pounds and typically holds 32 to 40 gallons of water.

Does a freestanding bath require tile work around it?

To tile around a free-standing tub is not necessary. However, you'll need to protect the wall from water damage if the free-standing tub is next to one. Tile is one option, but it's not the only one, for doing it.

What fixtures for bathrooms are timeless?

One of the most common materials for bathroom fixtures is chrome. Chrome is very likely to always be in vogue. No matter what color palette you choose-plain white, warm, neutral tones, or vibrant, vivid hues-chrome works well. Additionally, chrome is excellent at resisting corrosion and is relatively simple to clean.

How can a clawfoot tub be made safe for elderly people?

You can install a tall, vertical support post with a curved grasp bar just outside the tub if you can't find a bathtub rail that works. It works in rooms with flat ceilings even up to 10 feet high. A version made by Tander ($178.55 at Home Depot) stays in place by placing pressure against the ceiling and the floor.

Are freestanding bathtubs merely a fad?

Freestanding tubs are not only as popular as they have ever been, but they are actually becoming more popular among homeowners, according to many interior design experts.

How is a freestanding bath drained?

To release the water from a typical freestanding bath, all you need to do is take out the plug. If you add too much water to the bath, there will also be an overflow hole. A few extra procedures are involved in the drainage of the bath if you have a freestanding Whirlpool bath.

Are freestanding bathtubs challenging to maintain?

The disadvantages of a standalone bathtubThey can be particularly challenging to clean around when situated close to a wall, therefore ideally there should be enough space between the wall and the bath so that you can enter and thoroughly clean the floor and wall tiles. A lot of freestanding bathtubs are pricey.Oct. 26, 2015

Claw foot bathtubs wholesaler Products

Luxurious Bamboo Bath Caddy, Mind Reader Bali Series, 27.5 x 5.75, Brown

Vintage bathtub faucet set with double cross handle by Aolemi, clawfoot tub faucet in oil-rubbed bronze, wall-mounted bathroom tub filler

VinBee 8 Pieces Antique Brass Box Legs, Feet, and Corner Protector in a Wood Case (1.70"x1.34")

Shower Faucet Sets Brushed Nickel Finish Silver 8 Inch Rain Shower Head 2 Cross Knobs Mixer Shower System with Handheld Shower Spray

948686-LV by Signature Hardware Deck-mounted Roman tub filler with hand shower by Vilamonte

Shower curtain with a variety of sports and games from Lunarable 69" W x 70" L, Orange Black, Fabric Bathroom Decor Set with Hooks, Balls with Dartboard Hockey Puck and Pins

White Ceramic Jewelry Tray for Engagement Wedding Birthday Gifts Green Ceramic Soap Dish with Drain, Leaf Shape Self Draining Soap Holder, Easy Clean Soap Dish for Shower Bathroom Kitchen Sink Bathtub

JUMBO Chrome-Bell Showerhead - B3100 Ball-Valve Technology - 12 Shower-Curtain Rings - My PlumbingStuff RX2300J JUMBO Clawfoot Tub Add-a-Shower - 60" D-Style Shower Rod

CERTIFICATION The US-based product support staff at Empava is happy to help with any sales- or product-related inquiries. They are cUPC certified and have five years of US manufacturing experience. SPECIFICATIONS Brushed nickel drain and overflow are inc

Telephone-shaped vintage wall-mount clawfoot tub faucet with a 3-9-inch adjustable center and two double-handles.

Top Reviews

R Kess

I installed a previous version of this faucet in the middle of the 1990s; it featured a vertically sliding gate to divert water from the tub faucet to the shower riser. It also had donut washer valves. The flow rate steadily decreased to an undesirable level after decades of use. The shower head was just dripping. There was no improvement even after disassembling and scrubbing in acid for a whole night to remove hard water deposits. Thus, this new value was installed and bought. It features a ball valve to redirect water flow from the tub faucet to the shower riser, as well as 1/4 turn cartridge valves. Ah, Tad ah! Better than the previous valve's initial water flow rate, and when the ball valve is turned to redirect water to the shower riser, there is no leakage of water via the faucet. I'm happy I paid the extra $10 for this faucet's ball valve diverter rather than the vertically sliding gate diverter. This is an exceptional value with unmatched performance if you have an ancient claw foot bathtub with 3-3/8" hot-cold valve centers.

Gina Harmon

We purchased from gotonovo in September and October 2021 two Rain Shower systems with hand sprayer, one Clawfoot Bathtub system with hand sprayer and three sets of Bathroom Sink widespread faucets, all in oil-rubbed bronze. The quality and style of what was received exceeded even our most hopeful expectations. Our professional plumber installed all of these easily. The oil-rubbed bronze finish is very very nicely executed. Now we have been living with these for many months and find them equal to if not superior to any top-of-the line (Rohl, California Faucets, etc.) that we have specified in previous homes. Spend thousands more if you want to, but why? A tip: because these vintage/contemporary styled shower fixtures are very streamlined and stand away from the walls, they do not have integrated anti-scald feature. No problem, you can either engage your plumber or do-it-yourself to install at you hot water heater a "mixing valve" which lets you establish a maximum temperature for delivered hot water thro

C82071

The faucet was already installed in the current tub, so I skipped that step, but the rest went up without any problems. With simply a cordless drill and adjustable wrench, I was able to easily erect the structure after spending thirty minutes setting out all the parts in front of the tub. (I did also require a handheld tiny hacksaw to cut down the ceiling support rod). The instructions were completely useless. This worked beautifully and would have worked the opposite way as well. As long as you have a wall on one side and one end of the tub, you'll be OK. My tub was in a corner, with one long side and the back end against a wall and the faucet end and other side open without a wall. If my memory serves me properly, my tub measured between 57 and 58 inches in length. If that's the case, you need to get the 54" tub rather than a lesser one. It is important to consider the assembly sequence before installation, as failing to do so may require disassembling portions in order to attach a ring connecting to a different section.

Hot Search Terms
Hot Search Terms